Xona Ball Bearing Forced Performance Blue Turbocharger for 2015+ WRX

Brand: Forced Performance

Product Code: 202520

Availability:In stock

$2,300.00 2,300.00
This FP Blue has seen Dyno Time ONLY! Customers car lost 3rd gear and the turbo was then removed and sent back to FP to be inspected and bagged up with the FP Approval! The turbo is exactly as pictured, in the bag with FP Tape sealed off from society. It awaits its new forever home and only the new owner of this turbo will be allowed to lay a finger on its Sexy CHAR! 
  • Compressor wheel - 73HTZ
  • Flow rating - 57LB per minute
  • CW Measurements - 52.6MM Inducer / 73MM Exducer
  • TW Measurements - 60.8MM Inducer / 54MM Exducer
  • Compressor Housing - Factory Size Stock Appearing Cover
  • Turbine Housing - 10CM FA20 Fitment Turbine Housing
  • CHRA - XONA Ball Bearing Center !!
  • Tial 15PSI Actuator
  • Oil Line - Included

The FA20 Blue™ turbocharger for the 2015+ Subaru WRX features the 73mm HTZ™ compressor wheel with a stock fitment, stock appearing cover coupled to the 10cm2 turbine section. This bolt on solution produces a great balance of spool and power. The FA20 Blue™ flows 57LB a minute and is capable of producing upwards of 475WHP. This turbo comes with an oil line and gasket set, giving you everything you need to bolt it straight onto your car. The factory oil drain sump will be kept and reused, it is shown in pictures for fitment only and is not included.

The Dyno Graph in the pictures is a 2015 WRX tuned by Clark Turner.

Note: The FA20 Blue is developed specifically for the 2015+ WRX platform, it will not fit any other platform with the FA20 motor. Additionally, it will not fit any vehicle with the EJ series of motors.

Porting is available and recommended for this turbocharger in order to fully realize the performance gains. Please take a look at our Porting Services page for examples.